Owon TDS Series Manuel d'utilisateur télécharger pdf (Page 60)

5.Advanced User Guidebook

Figure 5-12 Wave of Vamp cursor measurement

Carry out the steps below for the Frequency cursor measurement:

1. Press the Cursor button.

2. Select Source in the bottom menu; select ○M in the left menu.

3. Select Type in the bottom menu; select Frequency in the right menu. Two blue

dotted lines displayed along the vertical direction of the screen, which indicating

L1 and L2.

4. Select Line in the bottom menu; select L1 in the right menu. The icon will

appear beside the dotted line of L1, represents you can turn the G knob to adjust

the position of L1. Select L2 to adjust the position of L2. Select L1&L2 to adjust

the two cursors together. The cursor measure window at the top right shows the

present position of two cursors and the absolute value of frequency difference

(see Figure 5-13).

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 81 82

Pas de commentaire

Owon TDS Series Manuel d'utilisateur Page 60