Owon TDS Series Manuel d'utilisateur télécharger pdf (Page 59)

5.Advanced User Guidebook

Figure 5-11 Waveform of Time Cursor Measurement

The Cursor Measurement for FFT mode:

Perform the steps below for the Vamp cursor measurement in FFT mode:

1. Press the Cursor button.

2. Select Source in the bottom menu; select ○M in the left menu.

3. Select Type in the bottom menu; select Vamp in the right menu. Two blue dotted

lines displayed along the horizontal direction of the screen, which indicating L1

and L2.

4. Select Line in the bottom menu; select L1 in the right menu. The icon will

appear beside the dotted line of L1, represents you can turn the G knob to adjust

the position of L1. Select L2 to adjust the position of L2. Select L1&L2 to adjust

the two cursors together. The cursor measure window at the top right shows the

present position of two cursors and the absolute value of amplitude difference

(see Figure 5-12).

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 81 82

Pas de commentaire

Owon TDS Series Manuel d'utilisateur Page 59