Owon SDS Series Manuel d'utilisateur télécharger pdf (Page 27)

5.Advanced User Guidebook

Figure 5-2 DC Coupling Oscillogram

Figure 5-3 AC Coupling Oscillogram

2. To adjust the probe attenuation

For correct measurements, the attenuation coefficient settings in the operating

menu of the Channel should always match what is on the probe (see "How to Set

the Probe Attenuation Coefficient" on P14). If the attenuation coefficient of the

probe is 1:1, the menu setting of the input channel should be set to X1.

Take the Channel 1 as an example, the attenuation coefficient of the probe is 10:1,

the operation steps are shown as follows:

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 108 109

Pas de commentaire

Owon SDS Series Manuel d'utilisateur Page 27