Owon SDS Series Manuel d'utilisateur télécharger pdf (Page 25)

5.Advanced User Guidebook

How to Set the Vertical System

The VERTICAL CONTROLS includes three menu buttons such as CH1 MENU,

CH2 MENU and Math, and four knobs such as VERTICAL POSITION,

VOLTS/DIV for each channel.

Setting of CH1 and CH2

Each channel has an independent vertical menu and each item is set respectively

based on the channel.

To turn waveforms on or off (channel, math)

Pressing the CH1 MENU, CH2 MENU or Math buttons have the following effect:

• If the waveform is off, the waveform is turned on and its menu is displayed.

• If the waveform is on and its menu is not displayed, its menu will be displayed.

• If the waveform is on and its menu is displayed, the waveform is turned off and its

menu goes away.

CH1 menu

CH2 menu

Couple setting Probe setting Limit setting

Figure 5-1 Channel Setting Menu (SDS6062(V), SDS7072(V) do not have "Limit" menu)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 108 109

Pas de commentaire

Owon SDS Series Manuel d'utilisateur Page 25