Owon HDS1021M Manuel d'utilisateur Page 50
- Page / 64
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
OWON HDS1021M Handheld DSO & DMM 8-Advanced Function of Oscilloscope
Now, you can see a screen that looks like the following figure 43.
figure 43: Waveform Saving
8.8 Function Setting Menu
The function setting menu is described in the following list.
Function menu Setting Description
Recall Factory Resume the instrument to its factory settings.
Auto
Calibration
Perform the Auto-calibration procedure.
Language
Chinese
English
Select the display language of the operation system.
Self-correcting:
The self-correcting program can improve the accuracy of the oscilloscope under the ambient
temperature to the maximum. If the ambient temperature variation is equal to or larger than 5
Celsius degrees, the self-correcting program should be performed to gain the maximum accuracy.
Before the self-correcting program is performed, the probe or lead should be disconnected with the
input connector, then, select the F2 key Self-correcting item. After confirming that everything is
ready, press the F2 key “Self-correcting” key and enter into the self-correcting program.
8.9 Making Automatic Measurements
The oscilloscope can perform 18 types automatic measurements such as frequency, cycle, average
value, peak-to-peak value , root mean square value,
Vmax, Vmin, Vtop, Vbase, Vamp,
Overshoot, Preshoot, RiseTime, Fall Time, +Width, -Width, +Duty, -Duty
.
And it gives two kinds of measurement results simultaneously on the screen.
The function menu for automatic measurements is described in the following list.
Function menu Description
４３
- User Manual 1
- Mar. 2012 edition Ver1.1 2
- General Warranty 3
- Table of Contents 4
- 1.Declaration of Conformity 8
- 1.2 Package Contents 9
- 2.Safety Information 10
- 3. General Characteristics 13
- 5. Input Connections 15
- 6. Using the Scope 18
- 6.4 Navigating a Menu 20
- 6.7 Input Connections 23
- Position 24
- 6.11 Freezing the Screen 25
- 6.15 Selecting AC-coupling 28
- 7. Using the Multimeter 30
- 7.4.3 On-off Test 33
- 7.5 Freezing the Readings 38
- 8.1 About this Chapter 41
- 8.2 Setting the Channel 41
- 8.4 Triggering Control 44
- 8.4.2 Video Triggering 45
- 8.5 Acquiring Mode Setting 47
- 8.6 Display Setting 47
- 8.6.1 Display Style 48
- 8.6.2 Persistence 48
- 8.6.3 Cymometer 48
- 8.7 Waveform Saving Setups 49
- 8.8 Function Setting Menu 50
- 8.11 Autoscale 54
- 8.12 System State Menu 55
- System State 56
- 8.14 Data Transmission 57
- 9.Trouble Shooting 58
- 10.Appendix 59
- 2Hz to full bandwidth 60
- 10.1.2 Meter 61
- 20A ±3%±3 digits 10mA 61
- 100-240 V AC 50/60Hz 63
- Power output 8.5 VDC 63
- Current output 1500 mA 63
- 10.2.1 Common Maintenance 63
Produits connexes et manuels pour Instruments de mesure Owon HDS1021M
(72 pages)Braun KF 157 manuály
Uživatelské manuály a uživatelské příručky pro Kávovary Braun KF 157.
Poskytujeme 1 manuály pdf Braun KF 157 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commentaires sur ces manuels